Before you store your boat for winter, there are several things that you need to do before you put it away into storage. Here are a few helpful tips from visit us website, who not only provide advice but can build a custom made building for Boat Storage in Spokane WA.
1. You will need to jack it up. Make sure that the hull support is adequate as it will be sitting all season long. You do not want the hull to become distorted or structurally compromised in any way. The three most important area that needs proper support are the engine, keel, and bulk heads. It is a good idea to figure out what type of support you will be using before you get it out of the water.
2. Avoid engine trouble by having a certified marine mechanic perform maintenance and winterization on the engine and fuel lines. There are certain additives to be used and cleaning techniques that should only be performed by a certified professional. If you do choose to perform the winterization yourself, make sure to strictly follow the maintenance manual that the boat manufacturer provides.
3. Clean it thoroughly. Make sure to drain the bilge drain plug immediately after hauling it from the water. Scrub the hull and decks to remove grime and barnacles. Take special care to drain and rinse the head as this is certainly not an area you want left to stew all winter. Clean the interior to remove any overlooked spills or food particles that may rot during the season. Try and place mildew control packets around the interior so that you don’t have a gross odor when the time comes to get the boat back in the water.
4. Place the battery and any other electronics in a warm, dry place so that they do not corrode. Make sure the battery is fully charged before removing it.
If you follow these simple tips before placing your pride and joy into Boat Storage in Spokane WA for the winter, you will not only have a clean and smooth-functioning boat when it is time to put it in the water again, you will also have a boat that has a long and happy life.
