Things That May Decrease the Need for Heating Repair in Appleton, WI

by | Sep 22, 2016 | Heating and Air Conditioning

Top Stories

Categories

Archives

Sometimes it’s necessary to have heating repairs through no fault of the homeowners, while in other cases, the homeowners could have done more to keep their furnaces in good working out. Taking a few steps may help limit the need for Heating Repair in Appleton WI.

Perform Annual Maintenance Tasks

There’s a reason why some maintenance tasks are recommended each year. These tasks help limit the risk for future problems with the heating system and can help catch problems earlier when they’re cheaper and easier to fix. Most oil companies offer annual checks and maintenance for furnaces, which is one way to easily accomplish these tasks. Fixing any problems during routine maintenance in the spring or fall is also much easier than trying to get them fixed in the winter when heating repair professionals are typically very busy and people need to keep their homes heated.

Change Air Filters Regularly

Not changing the air filters can make it more likely that there will be problems with the furnace later, such as the furnace not producing enough heat or the furnace frequently cycling between the on and off modes. The furnace has to work harder if the filters are dirty, so it will use up more energy and cost more to run. Changing the filters should be done about once a month in most furnaces, though the manufacturer’s directions will specify the desired frequency. Some filters are meant to be cleaned rather than replaced. It’s possible to ask the professional who comes in to do the annual maintenance to show you how to do this if you’re not sure.

Check the Thermostat

In some cases, it may not be necessary to call for Heating Repair in Appleton WI. Sometimes a furnace not putting out any heat could be due to a simple problem, such as the batteries being dead in the thermostat. Simply changing the batteries could resolve the problem. The thermostat setting could also be too low or too high for the furnace to run and get to the temperature desired, or it could actually be malfunctioning and need to be repaired.

Should the furnace no longer heat the home properly or start to be very noisy, it’s time to call in an expert. Contact “Company Name” for more information.