Eventually even the best maintained automobiles begin to look their age, a few nicks and scratches as well as general pain fading detract from the appearance of what is otherwise a fine automobile. If your vehicle is as described the first thing that has to be done is to do an analysis of the vehicles current surface finish. In many cases it is not necessary to use automotive paint stripper, surfaces that are only dull can often be restored using ribbing compounds and wax. Look closely at the surface; if the paint is cracked, crazing, peeling, flaking or contains small pinholes are quite easy to recognize, these problems cannot be rectifies without removing the old finish. For situations like this or in cases where your car has had several paint jobs the best solution is to strip it to bare metal, make any repairs and paint it right from scratch.
Choices for paint removal:
There are several methods that are used as an automotive paint stripper. These methods include sandblasting, chemical strippers, hand stripping as well as power sanding and grinding.
Sandblasting is a very quick, very effective way of getting all the paint of the surface, however there are certain issues that must be watched closely. Sandblasting uses various media, some are very abrasive and although they will get the paint off, they also damage the surface of the underlying sheet metal. The best bet is to use plastic beads, they will remove all the paint but they are not an abrasive so the metal is left untouched.
Although a fully assembled car can be sandblasted it is best if the car has been disassembled as you want every nook and cranny to be treated.
Media blasting is becoming far more popular than using silica sand. It is the same process as sand blasting and the same equipment can be used, the difference is the media is different. Hard plastic which is no bigger than grains of sand is ideal. This material has no affect whatsoever on the metal, it simply removes the paint. The only drawback to media blasting is that it does not remove rust; this must be done using hand or power tools such as grinders and sanders.
plastic blast media is ideal as an automotive paint stripper. Urea is ideal. It strips paint, wax, sealants, adhesives, etc but does not harm the body panels. Contact Business Name for more information.
